Drill stabilizer
Drilling tool stabilizer (also known as centralizer) is an important tool for preventing well deviation in oil, gas and geological exploration drilling engineering.It has a wide range of uses.Whether it is increasing or decreasing slope, it needs to be equipped on the drill string. Install a number of drilling tool stabilizers to improve the wellbore quality and drilling speed and reduce drilling costs. According to the structure, the drill stabilizer can be divided into: overall spiral stabilizer, overall straight edge stabilizer, roller stabilizer, interchangeable set of spiral stabilizer, and variable diameter stabilizer, etc.; according to the different installation positions, it can be divided into wells Bottom type and drill string type. Executive standard: Apl Spec7-1, SYT5051-2009
Working OD in(mm) |
Fishing OD in(mm) |
Up Conn. | Down Conn. | ID in(mm) |
OAL in(mm) |
Fishing Length in(mm) |
Blade Length in(mm) |
Blade wide in(mm) |
Remark |
---|---|---|---|---|---|---|---|---|---|
5 5/8 (φ 142.9) |
4-3/4 (φ 120.7) |
NC38 | NC38 | 2 1/4 (φ 57.2) |
57 (1448) |
20 (508) |
16 (406) |
2 1/4 (57.2) |
String |
3 1/2 REG | Near Bit | ||||||||
8 15/32 (φ 215.1 ) |
6 1/2 (φ 165.1 ) |
NC50 | NC50 | 2 13/16 (φ 71.4) | 60 (1524) |
20 (508) |
16 (406) |
2.5 (63.5) |
String |
4-1/2 REG | Near Bit | ||||||||
12 1/4 (φ 311.1 ] |
8 (φ 203.2) |
6 5/8 REG | 6 5/8 REG | 2 13/16 (φ 71.4) |
63 (1600) |
20 (508) |
16 (406) |
3 1/2 (88.9) |
String Near Bit |
17 1/2 (φ 444.5) |
9 (φ 228.6) |
7 5/8 REG | 7 5/8 REG | 3 (φ 76.2) |
721/2 (1840) |
20 (508) |
18 (457) |
4 3/4 (121) |
String Near Bit |
22 (φ 558.8) |
9.5 (φ 241.3) |
7 5/8 REG | 7 5/8 REG | 3 (φ 76.2) |
93 (2362) |
30 (762) |
20 (508) |
4 3/4 (121) |
String Near Bit |
26 (φ 660.4) |
9.5 (φ 241.3) |
7 5/8 REG | 7 5/8 REG | 3 (φ 76.2) |
93 (2362) |
30 (762) |
20 (508) |
4 3/4 (121) |
String Near Bit |
28 (φ 711.2) |
9.5 (φ 241.3) |
7 5/8 REG | 7 5/8 REG | 3 (φ 76.2) |
98 (2362) |
35 (889) |
20 (508) |
4 3/4 (121) |
String Near Bit |